At a news conference at Sun ‘n Fun Aerospace Expo 2024, Nicolas Chabbert, senior vice president of Daher’s Aircraft Division said the strained production has resulted in two-year backlogs for both the Kodiak and TBM lines of high-performance turboprops.

“We would like it to be about a year,” he said. He said sourcing and acquiring the correct parts is a daily challenge for the company, but it is improving and the company has been steadily producing aircraft. It delivered 56 TBMs and 18 Kodiaks last year and is targeting delivering at least 60 TBMs and 25 Kodiaks in 2024.

• READ MORE: Daher Delivers 74 Aircraft During 2023, Reports Orders for 100 More

Meanwhile, the company has added some safety enhancements to its flagship TBM 960 by adding systems to detect unresponsive pilots. If the pilot doesn’t interact with the aircraft or controls in some way in a 30-minute span a voice annunciation sounds. It will try twice more to rouse the pilot before activating the autoland system.

It also added lights to indicate if the yaw damper has been activated, a “check gear” light and a “propeller abort” if the propeller isn’t correctly configured for takeoff. It’s also added 3D SafeTaxi and runway occupancy alert. A nosegear-mounted taxiing light has also been added.

Editor’s Note: This article first appeared on AVweb.

The post Amid Supply Chain Challenges, Daher Hopes to Boost Production appeared first on FLYING Magazine.

According to Daher and GAMA, four students, two from North America and two from Europe, will be selected. The interns will spend eight weeks exploring their areas of interest at the facilities of Daher’s aircraft division outside their home countries.

The North American interns will be assigned to the division’s Tarbes, France, headquarters and production facility for TBM aircraft. The interns coming from Europe will be based at the division’s Sandpoint, Idaho, operation, where Kodiak aircraft are produced. The company noted that the internship covers travel and living expenses, and lodging costs.

• READ MORE: GAMA, Daher International Internship Aims to Build Aerospace Workforce

“These internships provide students with an invaluable educational experience that will further their knowledge of the incredible opportunities in our robust and global industry,” said Pete Bunce, GAMA president and CEO, adding that he was particularly impressed after spending time with last year’s interns in Tarbes and Sandpoint.”[It was] inspiring to see these extraordinary experiences spark their enthusiasm toward future opportunities in the industry.”

Nicolas Chabbert, senior vice president of Daher’s aircraft division, echoed Bunce’s enthusiasm.

“More than ever, the general aviation sector must motivate those who will lead the industry of tomorrow, facing challenges that range from reducing its environmental impact and finding new global supply chain solutions to strengthening the talent pipeline for all types of jobs,” Chabbert said.

All four interns will be part of Daher’s team at EAA AirVenture at the end of July. During the annual gathering in Oshkosh, Wisconsin, they will have the chance to explore the aviation world and potential careers.

Who Is Eligible?

The internship is open to ages 21 to 24  who are citizens of the United States, Canada, or Europe. They must be enrolled as full-time students pursuing associate, undergraduate, or graduate degrees. Applicants should be able to demonstrate an interest in an aeronautical career, such as engineering, flying, aircraft maintenance, manufacturing, marketing, or related areas.

Candidates need to submit a résumé and cover letter that explains why they are the optimum candidate for the experience and provide supporting examples of interests and achievements. They must also submit a 40-second video introducing themselves and describing expectations for the internship.

North American students can apply here.

European students should apply at the GAMA-Daher U.S. internship experience or via email at w.ferreira@daher.com.

The deadline for submissions is March 30. The selections for this year’s internships will be announced by Daher and GAMA at the Sun ’n Fun Aerospace Expo on April 9 in Lakeland, Florida.

The post Daher, GAMA International Internship Program Looking for Candidates appeared first on FLYING Magazine.

Daher’s position demonstrates well the state of the global aerospace market.

“We are in a paradox situation—some are happy; some are not happy,” said Patrick Daher, board chair for the Daher group, in kicking off the company’s performance review for 2023 in Paris on February 7. “We are feeling the impact of the international situation, and then we are still recovering from COVID, but the COVID crisis is over for us…But some international threats—for example the war in Ukraine and the Middle East, the future elections, the situation in China—all these events have created a political instability that is really worrying for the future.”

Yet industry events such as the 2023 Paris Air Show indicate where the future lies—with caution as to the expense of making change. “As chairman [of] the Salon de Bourget in 2023 and chairman of Daher…I have the chance to see that energy transition is coming with a really high price,” said Daher. “Speaking about industry, we have really good news in terms of an increase in production.”

In 2023, Daher recorded strong deliveries of both its TBM and Kodiak series turboprops, with a total of 56 TBMs and 18 Kodiaks, for a total of 76 units. In addition, it counts more than 100 turboprops in its order book, taking it well into 2025.

READ MORE: Daher Delivers 100th TBM 960

An Industry Overview

At the same time, major Daher client and partner Airbus has never manufactured so many aircraft—a record number went out the door in December, as Daher noted in the report. That is in spite of the constant pressures brought on by inflation, provisioning difficulties, recruitment challenges, rise in wages, and lowering margins. Collectively these have led to soft pricing models that have persisted through the past couple of years.

“We have forgotten how to deal with such problems of inflation that we experienced 20 years ago,” said Daher. “It was really hard to find raw materials, and this was linked to geopolitical problems, [such] as the war in Ukraine. We were missing material. This lack of raw materials is linked to the mismanagement of the supply chain—the suppliers failed to ship what we needed to manufacture our aircraft—and to produce what our clients asked us to do.”

Another problem Daher noted has been the lack of employee candidates. “It is not easy to recruit the right profiles…The COVID crisis changed behaviors in terms of wages and employees, so it is really hard for us to hire and find talents.” This has driven companies like Daher to invest heavily in training—because like never before they have had to recruit from outside the aviation industry.

“All these factors in 2023—after COVID, we were expecting 2021 and 2022 to be difficult—but these problems arrived in 2023,” Daher said. “All of these factors resulted in our weakened profitability. We need to consider the energy transition and the decrease in carbon intensity…2023 highlighted the emergency but also the [convergence], vis-à-vis the problem of decarbonization.”

The Daher group considers government support crucial—specifically CORAC, the French council for civil aviation research—and 300 million euros per year have been earmarked by CORAC to help fund the energy transition. “Aviation industry, all research efforts, have converged, because in the past each company focused on a specific research field, but right now there is a really clear target: low-carbon, low-emission aircraft,” Daher said.

Eco-Pulse Update

For the French OEM, the convergence flies today via its hybrid-electric Eco-Pulse technology demonstrator, which uses a TBM airframe, electric motors and powertrain components form Saran, and electric power storage by Airbus in a distributed lift model (simply put) to test various components and how they interact in actual flight operations. The Eco-Pulse retains a Pratt & Whitney PT6A turboprop engine, but in December made its first flight segments completely powered by the six electric motors.

“It is a major step towards decarbonization,” said Daher. “Because high voltage electricity can be a good solution…we are continuing with some hybrid tests. This is the first step…People thought I was crazy [last year] when I spoke about this target [to have a marketable product by 2027], but we are headed in that direction.” It will be a TBM or Kodiak because those are the models Daher has in its portfolio, but the company has yet to determine which will be chosen and exactly what that will look like.

FLYING asked if the OEM could share any feedback—including any performance data, if possible—from those first flights. Christophe Robin, vice president of engineering for Daher’s aircraft division, provided this insight: “EcoPulse is a technology demonstrator, therefore, aircraft performance is not the goal. The EcoPulse configuration has been chosen with the strategy of increasing the level of complexity in hybridization to develop a ‘maturity picture’ for all of the technologies involved—including examining side effects such as weight penalties, as well as issues induced by HIRF (high-intensity radiated field) and lightning.”

READ MORE: We Fly: Daher TBM 960

Log’in, Shap’in, Fly’in

To support innovation efforts, Daher launched its second tech center, Log’in, in Toulouse, also geared toward decarbonization. “Out of 7 million tonnes [of carbon emissions] we realized that a big quantity is related to our clients, and we want to work on these figures [as well] in order to work on decarbonization,” said Daher.

Fly’in will be the third tech center Daher launches, in Tarbes, focused on aircraft development, “stepping up” in both technology and the drive towards net-zero emissions.

FLYING also asked Daher to expand on the current projects that have already been realized from the new technology centers and Eco-Pulse. Robin shared a portion of what the group has learned thus far, and what it expects to benefit from. 

“In addition to the aspects of EcoPulse that are linked to aircraft hybridization, another important focus is demonstrating the application of advanced composites on aircraft,” said Robin. “Under the guidance of Daher’s research and technology teams, EcoPulse is using composites for the aircraft’s winglets, engine pylons, Karman and battery fairings, as well as the air inlet—which were produced primarily with an infusion-based carbon/cork micro-sandwich. A goal of EcoPulse is to make it possible to evolve the performance and feasibility of integrating these technologies on secondary parts/components of Daher-built aircraft, while developing rapid prototyping skills used within the aviation framework.”

This is complementary to other developments underway at Daher—including projects in cooperation with partners such as CORAC (the French Council for Civil Aeronautical Research).

Pascal Laguerre, chief technology officer for Daher, provided significant insight beyond the Eco-Pulse demonstrator. “Taking a wider view for activities outside the framework of EcoPulse, Daher devotes a significant part of its overall R&D budget to thermoplastics,” said Laguerre. “This material is particularly promising in the world of aerostructures for future applications on production aircraft. It lends itself more easily to the automation of production (issue of throughput), and it is recyclable, repairable and weldable. Its mechanical properties make it possible to use less material and, overall, make structures lighter—all of which are key qualities with a view toward reducing carbon emissions. This is focused on accelerating the development of real applications in the future for the benefit of its customers, including [several more widely focused] projects.”

For example, as part of CORAC, Daher leads the largest French research project on thermoplastics in current execution, called TRAMPOLINE 2 (TheRmoplAstic coMPosites for hOrizontaL tail plaNE), as well as utilizing induction welding instead of riveting—with a weight savings of 15 percent.

Also, the investment has already borne fruit in components that will be found on the company’s current TBM product lines.

“After more than three years of R&D work, Daher succeeded in manufacturing rudder pedals in recycled high-performance thermoplastic composites from production scraps to equip the TBM, which have been certified for flight on production TBMs,” said Laguerre. “In addition to being lightweight, thermoplastics have low thermal conduction, as well as equal or better physicochemical and mechanical properties: It’s a win-win for Daher customers. And beyond the environmental benefits, the cost of these parts is significantly reduced compared to metal machining.

“In addition, Daher has obtained the first results of an R&D project called CARAC TP, carried out in collaboration with a set of academic laboratories competent in composite materials. The objective [is] to identify and characterize the thermoplastic composites best suited to aeronautical applications and compare them to thermoset materials. The project makes it possible to study materials in depth through multiple tests that go beyond the scope of qualification programs carried out in the industry: impact resistance, fire resistance, environmental aging (ozone, UV, fluids), impact of manufacturing processes on physicochemical properties, material performance, etc.”

Daher looks also outside its walls to new small businesses to help drive this innovation charge. Encouragingly, more than 300 aerospace-relevant startups took part in the Paris Air Show.

“We had 25 of these startups at the Daher stand at Le Bourget,” said Daher, noting that the company looks forward to engaging with these innovators, perhaps through acquisition or collaboration, on various projects.

WATCH: We Fly the Kodiak 900, Ready for Grand Adventures

The Takeoff 2027 Strategy

Daher reported a strengthening bottom line but noted there is room for improvement. At the press conference, Daher CEO Didier Kayat indicated the belief that Daher would become profitable based on its strategic realignment to better serve four sectors: aircraft, industry, industrial services, and logistics. The company also plans a transformation of the organizational structure by 2025, to help align and draw down any existing silos between the business functions.

To this end, Daher made a quartet of additions to its executive committee in the later part of 2023. On October 1, Alain-Jory Barthe joined Daher’s Industry division as senior vice president. Then, on January 1, Cédric Eloy became the head of the Industrial Services division as senior vice president of manufacturing services, and Julie de Cevins became the group’s chief sustainability officer—a key appointment, given the group’s charge to attain net-zero goals by 2050. Finally, on February 1, Aymeric Daher became senior vice president of the Logistics division.

Daher is adapting its organization to support the four business units, with the following actions:

• To create a managerial culture that is based in what it calls the “Daher Leadership Model”—effectively empowering a cadre of 1,500 leaders within the company to act with an entrepreneurial spirit
• To anticipate challenges and innovate toward decarbonisation solutions, with Eco-Pulse among other projects
• To support the acquisitions needed for growth across the four sectors.

Acquisitions have already borne fruit for the company, including the Stuart, Florida, facility.

“The acquisition of AAA strengthened the Industrial Services division, for example,” Daher said. “We are now the leader of industrial services…We can support aircraft manufacturers in peak periods.”

If Daher can make its way through the concurrent challenges of acquisition-driven growth, corporate restructuring, price pressures, and order fulfillment, its plan for the years ahead puts it on track to form part of the global solution to decarbonization—as well as providing the aircraft the customer demands for the future.

The post Daher’s Decarbonization Plans Drive Towards Hybrid-Electric Aircraft, Composites appeared first on FLYING Magazine.

This week, European firms announced two collaborations intended to herald the transition from traditional jet fuel to alternative sources, such as hydrogen.

The first, between industry titan Airbus and four Scandinavian firms, aims to study the feasibility of hydrogen infrastructure at airports in Norway and Sweden. The companies claim the study—which covers two countries and more than 50 airports—is the first of its kind.

“Hydrogen stands out as a key enabler as we pioneer a sustainable aviation future,” said Guillaume Faury, CEO of Airbus. “Norway and Sweden are among the most demanding regions for aviation and have great potential for hydrogen production from renewable energy sources.”

Faury added that the company intends to deploy hydrogen ecosystems in “most suitable parts of the world.”

Separately, Cranfield Aerospace Solutions (CAeS), a U.K.-based hydrogen aircraft developer, signed a memorandum of understanding (MOU) with LoganAir, the U.K.’s largest regional airline, to fly hydrogen-electric aircraft between Scotland’s Orkney Islands by 2027. The partners believe the collaboration could deliver the world’s first commercial zero-emissions flights.

Airbus Forms a Hydrogen Herd

Airbus on Wednesday said it will work with Avinor and Swedavia, the flag carriers of Norway and Sweden, respectively, as well as Scandinavian Airlines (SAS), which serves the broader region. The companies will be joined by Vattenfall, a Swedish energy and power firm, which will support the partnership with electrical infrastructure and hydrogen production.

“We want to enable industry decarbonization,” said Anna Borg, president and CEO of Vattenfall. “Aviation is a hard-to-abate industry, where breaking away from fossil fuels is a huge challenge today. This cross-border collaboration however demonstrates the willingness to bring about change.”

According to Airport Carbon Accreditation, airport-controlled activities comprise around 2 to 3 percent of all aviation emissions. To reduce that figure, airports will need to move away from traditional aviation fuel and toward sustainable aviation fuel (SAF) and other renewable alternatives, such as hydrogen.

“If generated from renewable energy through electrolysis, hydrogen emits no CO2 [carbon dioxide] emissions, thereby enabling renewable energy to potentially power large aircraft over long distances but without the undesirable by-product of CO2 emissions,” Airbus claims on its website.

Airbus and its partners will study hydrogen aircraft concepts and operations, infrastructure, and refueling at airports to develop a hydrogen ecosystem in Norway and Sweden. The study will also identify which airports are candidates for early transformations and which regulatory frameworks will need to be in place.

“Hydrogen is expected to gradually become an increasing part of the aviation industry’s fuel mix in the future and will therefore have an increasing effect on the infrastructure and planning of our airports,” said Jonas Abrahamsson, president and CEO of Swedavia. “This partnership is a major and important step towards fossil-free aviation in the Nordic region.”

Airbus sees potential for hydrogen to be combusted into fuel to power modified gas turbines or converted to electric power via fuel cells. It could even be used to create synthetic fuels, or e-fuels, which are generated exclusively using renewable sources.

The manufacturer’s goal is to bring a low-carbon commercial aircraft to market by 2035. In 2020, it launched ZEROe: a program to develop aircraft, systems, and an ecosystem for hydrogen aviation. All four aircraft concepts being developed under ZEROe—a turbofan, turboprop, blended-wing body, and fully electric model—are hydrogen powered and designed for 100 to 200 passengers. 

Last week, Airbus tested ZEROe’s “iron pod” hydrogen power system, a key milestone in the program’s progress. And in December, the EcoPulse demonstrator, a joint project between Airbus, Daher, and Safran, made its first hybrid-electric flight.

To build out an ecosystem, Airbus in 2020 introduced “Hydrogen Hub at Airports,” a program that initiated research into infrastructure requirements for low-carbon airport operations. The initiative brings together key industry players and includes airports, airlines, and other partners in France, Germany, Italy, Japan, New Zealand, Norway, Singapore, South Korea, Sweden, and the U.K.

Electrifying the Islander

As Airbus and Co. collaborate on hydrogen infrastructure, CAeS and LoganAir are eyeing real-world flights.

LoganAir, which aims to be net-zero by 2040, hopes to fly the first operational hydrogen-electric Islander in the Orkney Islands by 2027, following certification in 2026. The Islander is one of the best-selling commercial airliners in Europe, used primarily for short-range commercial passenger service.

“The short-haul routes we operate in Orkney and the challenging weather conditions we face make the ideal test bed for hydrogen-electric aircraft, and we are incredibly proud that we could be offering the world’s first commercial zero-emissions flights,” said Peter Simpson, executive chairman of Loganair.

LoganAir is a longtime supporter of CAeS’ Project Fresson: an initiative, partially funded by the U.K. government, to develop hydrogen fuel cell propulsion systems for the more than 700 Islanders in operation, supported by Britten-Norman.

This week’s MOU, however, steps up the firms’ collaboration with additional operational requirements and design, standards and regulations, infrastructure development, and stakeholder engagement.

A proposed merger between CAeS and Britten-Norman, announced last year, would form a new company dedicated almost entirely to installing CAeS fuel cells on Islanders. But the firms have since put a pause on the deal.

“Collaborating closely with Loganair, we aim to harness our combined experience and expertise to address the operational and infrastructure considerations, ultimately ensuring the successful deployment of the hydrogen-electric Britten-Norman Islander across Loganair’s lifeline routes within the islands,” said Paul Hutton, CEO of Cranfield Aerospace.

Separately, CAeS is continuing to develop hydrogen fuel cells for a range of crewed and uncrewed aircraft, including cargo aircraft. In October, its fuel cell system order pipeline topped 1,300 with a letter of intent from cargo drone operator Dronamics.

Like this story? We think you’ll also like the Future of FLYING newsletter sent every Thursday afternoon. Sign up now.

The post Airbus, More European Aviation Firms Explore Hydrogen Future appeared first on FLYING Magazine.

The TBM family of aircraft led the results with 56 TBM 960s and 910s delivered, and the Kodiak 100 and 900 utility models accounted for 18 deliveries. The numbers mark a level state overall from 2022 for the OEM, echoing the challenges still presented in the global aerospace industry revolving around both supply chain and maintaing a steady workforce.

• READ MORE: We Fly: Kodiak 900

“These figures reflect the market’s stabilization as we continue to see a strong demand for TBM and Kodiak aircraft, although challenges persist in affecting our industry—including employment and supply chain issues,” said Nicolas Chabbert, senior vice president of Daher’s aircraft division. “There have been efforts made to address these difficulties and improve the situation. We are seeing the results of our solutions in the employment field through internal training and the attraction of new talent. For the supply chain, the importance of delivering on time will enable us to continue seeking opportunities in a strong market.”

• READ MORE: Daher Celebrates Milestone TBM Deliveries, Kodiak Success

Daher said most of the TBMs delivered during 2023 were top-of-the-line TBM 960s, with the largest percentage going to the North American market. Among those deliveries, 43 went to the U.S. and two to Canada. The remainder of deliveries included seven in Europe, three in Latin America, and one in Asia.

Most of the 18 Kodiak aircraft delivered last year were sent to a range of private owners and “multimission operators” in North America, with the North Carolina Forest Service’s aviation division among the company’s new customers. Deliveries included the Kodiak 100 Series III, which now has a five-blade Hartzell composite propeller as standard equipment, and the larger, faster Kodiak 900, which Daher introduced in 2022.   

• WATCH: We Fly: Kodiak 100 in Training

A total of 1,187 TBMs and 339 Kodiaks had been delivered worldwide through the end of 2023, and the global fleet has logged nearly 3 million flight hours. The aircraft are supported under Daher’s newly consolidated network called TBM & Kodiak Care.

The post Daher Delivers 74 Aircraft During 2023, Reports Orders for 100 More appeared first on FLYING Magazine.

Today’s Top Pick is a 2006 SOCATA TBM 850.

Many pilots will tell you how much they love their aircraft and that they were meant to be together. But when a fast, pressurized, and beautiful TBM 850 taxis by on the ramp, some will instantly want to put their old machine out to pasture.

This model appeared on the market around the same time people were buzzing about the pending arrival of the very light jets, or VLJs, that were set to shake up general aviation and change the way large swaths of the population traveled. Quite a few folks who flew the TBM 850 questioned whether anyone really needed a VLJ when this turboprop could cruise at more than 300 ktas. This and subsequent TBM models stand alone in their combination of performance, comfort, efficiency, and great looks.

This 2006 TBM 850 has 1,780 hours since new on the airframe, Pratt & Whitney PT6A-66D engine, and four-blade propeller. The updated panel includes the Garmin G600 TXi avionics package with dual PFD/MFD displays, GSU 75 ADAHRS and engine indication system, GMA 35c remote audio panel, GI 275 electronic standby, dual GTN 750 Nav/Com/GPS, GSB 15 USB charger, GTS 825 traffic advisory, GWX 75 weather radar, GFC 600 autopilot, and dual GTX 335DR/ GTX 345DR transponder. The aircraft received new paint in 2021.

Pilots looking for a single that is fast enough to keep its owner from envying small jets and comfortable enough to put smiles on the faces of family, friends, and business associates should look into this 2006 TBM 850, which is available for $1,975,000 on AircraftForSale.

You can arrange financing of the aircraft through FLYING Finance. For more information, email info@flyingfinance.com.

• FLYING Magazine: TBM 850: A Jet With a Prop
• FLYING Magazine: TBM 850: Cargo Hauler?
• FLYING Magazine: TBM 850 Elite Goes All Glass
• Plane & Pilot: DAHER-SOCATA Delivers 40 TBM 850s In 2013
• Plane & Pilot: TBM 850 Scorching The Airways With Style
• Plane & Pilot: Hartzell‘s Composite 5-Blade Swept Prop For TBM 700/850 Recording Brisk Retrofit Sales
• AVweb: Daher Delivers Its 1,100th TBM-Series Turboprop Single To U.S. Pilot-Owner

The post This 2006 SOCATA TBM 850 Is a Handsome, Airway-Prowling ‘AircraftForSale’ Top Pick appeared first on FLYING Magazine.

The Autoland system is designed to take control of the aircraft in an emergency and land it autonomously at the nearest suitable airport. This technology is meant to bring additional safety and peace of mind to the cabin for passengers and pilots concerned about possible pilot incapacitation.

• WATCH: We Fly Garmin Autoland King Air 200

“We are thrilled to deliver our first Garmin Autoland upgrade in a King Air B200,” said Dan Edwards, CEO of Elliott Aviation. “Safety is always our top priority, and the Garmin Autoland system represents a groundbreaking advancement in aviation technology. This achievement reflects our team’s expertise and commitment to providing our customers with the latest and most advanced avionics solutions.”

The company previously performed similar upgrades to Daher TBM 940s that had not been equipped with the Autoland system—specialized by Daher as Home Safe—at the factory. The Moline, Illinois, company said the King Air upgrade “underscores Elliott Aviation’s dedication to staying at the forefront of technological advancements within the aviation industry.”

• READ MORE: Elliott Aviation Completes Home Safe Upgrades to TBM 940

Founded in 1936, Elliott Aviation provides a range of aviation services including avionics, maintenance, accessories, paint, interiors, and aircraft sales.

The post Elliott Aviation Delivers First Garmin Autoland Upgrade in King Air B200 appeared first on FLYING Magazine.

Airflite, which is based in Western Australia, previously received repair and overhaul approval for Daher’s series of Kodiak utility aircraft. Airflite operates from two primary facilities located at Perth International Airport (YPPH) and Jandakot Airport (YPJT). The company also operates a maintenance hangar in the southeast Australian state of Victoria at Moorabbin Airport (YMMB).

• READ MORE: Daher Partners with Czech Service and Sales Provider

Airflite’s range of services for TBM and Kodiak includes structural repairs, avionics, batteries, propellers, painting, and nondestructive testing. The company has a mobile repair team that can support Daher aircraft across the continent. Airflite also is Daher’s aircraft sales representative in Australia for TBM and Kodiak.

To qualify as an authorized TBM service center, Airflite staff members completed Daher’s training, which includes a two-week mechanic course with a Daher instructor and training covering the TBM Total Care Program and warranty coverage. 

• READ MORE: Daher Marks 1,100th Delivery of TBM Series

“We’ve been extremely impressed with the scope and depth of Airflite’s capabilities and its capacity, which is backed by rigorous internal training and a philosophy that mirrors Daher’s strategy of empowering employees in advancing the culture of safety,” said Raphael Maitre, vice president of customer support at Daher’s Aircraft Division.

Said Kristian Constantinides, Airflite’s general manager: “Our appointment by Daher as a TBM and Kodiak service center is a recognition of our level of expertise and commitment to maintaining and servicing these aircraft. It is a testament to the trust Daher places in Airflite’s capabilities.” 

Airflite said TBM and Kodiak aircraft are well suited to operations in Australia, which is known for remote airfields and vast stretches between population centers. Daher noted that Air Gold Coast, a maintenance operation based in Coolangatta, Queensland, remains as an authorized TBM service center.

The post Daher Names Australia’s Airflite as Authorized Service Center for TBM appeared first on FLYING Magazine.

“My home base is near Santa Maria on California’s central coast, which has very limited commercial airline service, so having a personal airplane is extremely valuable as I continue to develop my business,” Kaseff said. “When I decided to upgrade from a piston-engine airplane to a high-performance aircraft, I searched the market and found that the TBM 960 was the best choice for me.”

Daher launched the TBM 960 at the Sun ’n Fun Aerospace Expo in April 2022. The model represents the fifth generation of the company’s TBM 900 series. Daher has delivered more than 500 TBM 900 series turboprops to date.

• READ MORE: We Fly: Daher TBM 960

“We are particularly proud that the 100th TBM 960 has been received by a newcomer to the TBM community,” said Daher Aircraft Division senior vice president Nicolas Chabbert. “It confirms that the TBM 960 is the quintessential TBM—meeting the expectations of entrepreneurs like Kevin Kaseff, who require a safe and efficient individual transportation tool.”

Powered by the Pratt & Whitney Canada PT6E-66XT engine, the model offers a top cruise speed of 330 knots, 1,730 nm range, and maximum payload of 1,446 pounds. The engine, along with the aircraft’s Hartzell five-blade composite propeller, links to a dual-channel digital engine and propeller electronic control system (EPECS).

The 960 also features an icing protection system, flight envelope monitoring via the electronic stability and protection (ESP) and under speed protection (USP) systems, emergency descent mode (EDM), and HomeSafe emergency autoland system. The model can seat up to six and comes equipped with the Garmin G3000 integrated flight deck.

The post Daher Delivers 100th TBM 960 appeared first on FLYING Magazine.

Today’s Top Pick is a 1985 SOCATA TB-20 Trinidad.

The TB family of general aviation aircraft from French manufacturer SOCATA is known for its wide, roomy cabins and styling that looks especially modern next to many legacy brands of GA aircraft even though  designed during the 1970s. The aircraft’s clean, angular shapes might remind some vintage sports car fans of trendsetting BMW, Lotus, and Maserati designs of Giorgetto Giugiaro and his Italdesign studio.

Speaking of cars, SOCATA was ahead of its time in designing aircraft interiors to incorporate many of the features people had become accustomed to in automobiles, like more intuitive controls and instrument arrangements and general ergonomics. This TB-20’s gull-wing doors foreshadowed a number of today’s GA designs. The aircraft is sure to turn heads on the ramp.

This 1985 SOCATA TB-20 Trinidad has 3,060 hours on the airframe, 324 hours on its Lycoming IO-540 engine since overhaul, and 182 hours on the Hartzell three-blade propeller. The panel includes dual Aspen displays for MFD and PFD, a Garmin GTN 650, Bendix/King KX 165, nav/com Bendix/King KMA 24 audio panel and KN 62A DME, Garmin GTX330 transponder, Stormscope, Bendix/King autopilot, and JPI EDM 730 engine monitor.

Pilots looking for a stylish, comfortable four-seat retractable that is off the beaten path because of its relative rarity in the U.S. should consider this 1985 SOCATA TB-20 Trinidad, which is available for $264,000 on AircraftForSale.

You can arrange financing of the aircraft through FLYING Finance. For more information, email info@flyingfinance.com.

• FLYING Magazine: Daher Opens New Paint Facility for Kodiaks in Idaho
• Plane & Pilot: SOCATA 1998 TB-20 Trinidad
• Plane & Pilot: 1999 SOCATA Trinidad TC

The post This 1985 SOCATA TB-20 Trinidad Is an ‘AircraftForSale’ Top Pick with European Flair appeared first on FLYING Magazine.