It is not uncommon for air traffic control to pose this question to pilots on IFR flight plans approaching certain airports when the weather is VFR. In daylight, when the visibility is good, the winds calm, and the pilot familiar with the airport—and the approach is a straight in—the visual is no big deal.

But throw in weather, fatigue, low light, pilot unfamiliarity, and a circle to land, and it’s a different event.

Honeywell Aerospace is trying to mitigate these risks, expanding its navigation database to offer flight management system (FMS) guided visual procedures as a stand-alone option.

According to Jim Johnson, senior manager of flight technical services at Honeywell, the visual approaches are created in collaboration with Jeppesen. The instructions for the guided visuals look like Jeppesen approach plates but carry the caveat “advisory guidance only” and “visual approach only.” In addition, the symbology on the approaches differs in a handful of ways.

“The FMS-guided visual provides a lateral and vertical path from a fix fairly close to the airport all the way down to the runway,” says Johnson. “You can hand fly them or couple them to the autopilot.”

Visual into KTEB

One of the first guided visual approaches was created for the descent to Runway 1 at Teterboro Airport (KTEB) in New Jersey.

The airport sits in a very industrialized area with the runway blending into warehouses and business parks. Honeywell provides a video of the visual approach on its website that illustrates the value of having that helping hand. Having the extra vertical and lateral guidance from a mathematically created visual procedure allows pilots to better manage their approach, configuring the aircraft in an expedient manner to avoid “coming in high and hot” in an improperly configured aircraft.

• READ MORE: Going with Glass: The Mother of All Panel Upgrades

This is quite helpful when the aircraft needs to circle to land, says Carey Miller, pilot and senior manager of technical sales at Honeywell.

“Going into Runway 1 at Teterboro on the visual, you are not aligned with the VASI,” Miller says. “There is no vertical guidance, which can lead to a dive to the runway. Add a moonless night or gusty winds, and it can be quite challenging. Not being able to see the airport is a detriment to your energy management. The visual approaches, when coupled to the autopilot, eliminate the guesswork and the overbanking tendency that can lead to stalls.”

Adds Johnson: “The aircraft will fly constant radius turns, [and] you will be on the same ground track every time because the computer knows how to manage the vertical and lateral path. It gets rid of the pilot drifting down or turning early because of the winds.”

Airspace Guidance

The guided visual procedures created thus far have come from suggestions from Honeywell customers, including a visual approach to Chicago Executive/Prospect Heights Airport in Wheeling, Illinois (KPWK). KPWK is in Class D airspace, 8 nm from Chicago O’Hare International Airport (KORD). The Class B airspace for KORD sits above KPWK. There is a V-shaped cutout with various altitudes over KPWK.

The guided visual can help the pilot avoid clipping the Class B airspace during the circle to land—and the dreaded phone call with ATC that results.

The Creative Process

Each approach is created using software tools that take into account the airspace and terrain at the airport, then test flown in simulators to check for flyability.

According to Johnson, the suggestions for where to offer the guided visual approaches come from their customers.

“There are a lot of secondary and regional airports in the U.S. that have both terrain and airspace considerations that make visual approaches very challenging,” says Johnson. “For example, Van Nuys, California [KVNY], has both airspace challenges and a ridge nearby.”

• READ MORE: All Flight Jackets Tell a Story

In some cases, the team may opt to create a visual approach as an overlay to improve safety at airports where closely spaced simultaneous approaches are in use. As this issue was going to press, Honeywell was working on an approach to Runway 28R/L at San Francisco International Airport (KSFO). The visual approach has a briefing sheet with textual guidance, and Honeywell has literally drawn a picture of it.

During development each procedure is flown in a simulator, using a specific briefing sheet that is checked and double-checked for accuracy and usability. Each approach has the ability to be coupled with the autopilot.

Miller cautions it is important to recognize that the visual procedures are not considered instrument approaches in the traditional sense.

“Do not request it as an approach, because ATC will not be aware of it,” Miller says. This information is emphasized on the procedure briefing sheet that accompanies each guided visual approach.

The guided visual approach is loaded in the FMS just like an instrument approach. The pilots can access them with a few pushes of a button, just as they do Jeppesen approaches.

“To use the visual approaches, the customer needs to have a Honeywell-equipped aircraft, and in addition to the FMS database, for an additional $2,000 per year they receive the visual approaches,” says Miller.

To request an approach, contact Honeywell at FTS@honeywell.com. It takes approximately four weeks to put one together.

Coming Full Circle

In many ways, the visual approach procedures represent a modern treatment to the first approaches created by Elrey Jeppesen—yes, that Jeppesen—who became a pilot in 1925 at the age of 18. At the time, there was no such thing as maps purpose-built for aviation. Pilots relied on road maps—which often weren’t terribly accurate, following railroad tracks from town to town or by pilotage and dead reckoning.

In 1925, Jeppesen went to work as a survey pilot and by 1930 was working for Boeing Air Transport, the precursor to United Airlines. This was decades before air traffic control and electronic navigation systems were created. Jeppesen bought a small notebook and filled it with information about the routes he flew. In it there were drawings of runways and airports and information that pilots needed to know, like the elevation of water towers, telephone numbers of farmers who would provide weather reports, and dimensions of the runway and its distance from the nearest city.

In 1934, this evolved into the Jeppesen Company and the notebook into the en route charts and terminal area procedures we know today. Much of Jeppesen’s flying was done in the Pacific Northwest. The Museum of Flight in Seattle is the keeper of the Elrey B. Jeppesen Collection, and for many years there was a replica of his first notebook on display in the Red Barn.

We think Captain Jepp would appreciate how far the approaches he inspired have come.

This column first appeared in the January-February 2024/Issue 945 of FLYING’s print edition.

The post Honeywell Crafts Safer Approaches Through Technology appeared first on FLYING Magazine.

United Airlines (NYSE: UAL) and electric vertical takeoff and landing (eVTOL) aircraft developer Archer Aviation (NYSE: ACHR) are banking on it, announcing the route as the latest addition to its list of airport-to-city center air taxi routes proposed to use the Midnight aircraft in development.

• READ MORE: Archer Aviation Reveals Midnight Production eVTOL

Archer unveiled its Midnight eVTOL production aircraft in November and said it is designed to complete two short, consecutive flights of around 20 sm, followed by charging sessions of about 10 minutes. 

The route to Vertiport Chicago, the largest vertical aircraft takeoff and landing facility in North America, will begin in 2025, Archer said.

“Chicago is the third most populous city in the United States, a center for business, innovation and investment, and home to United’s headquarters,” Archer said. “This makes it a unique city for Archer and United to build out.”

Late last year, the two companies announced plans to establish the first airport-to-city-center route using Archer’s all-electric Midnight air taxi between Newark Liberty International Airport (KEWR) to the Downtown Manhattan Heliport in New York (KJRB). At the time, Archer said the route plan marked the first time an eVTOL company has named a specific route it plans to serve.

• READ MORE: Archer eVTOL Production to Get Lift from Carmaker Stellantis

And like the New York route, the Chicago service would have an eye on expansion. Initial routes will focus on “trunk routes” between the airport and the city center, with “branch” routes to surrounding communities following as a next step.

“Both Archer and United are committed to decarbonizing air travel and leveraging innovative technologies to deliver on the promise of the electrification of the aviation industry,” Michael Leskinen, president of United Airlines Ventures, said in a statement. “Once operational, we’re excited to offer our customers a more sustainable, convenient and cost-effective mode of transportation during their commutes to the airport.” 

The post Archer, United Plan eVTOL Air Taxi Route in Chicago appeared first on FLYING Magazine.

According to LiveATC.com, approximately 30 minutes into the flight, the pilot flying as first officer notified air traffic control: “Need to return, the captain is incapacitated.” The flight was cleared back to O’Hare.

Subsequent transmissions between ATC and O’Hare tower depict controllers giving the pilot flying clearance back to the aircraft and information as to where to taxi to so that medical personnel could get to the incapacitated pilot.

Audio via @liveatc of American Eagle (Envoy) flight 3556 on Nov. 19. This is the reason commercial jetliners have at a minimum two pilots. https://t.co/hanPLAWbYY pic.twitter.com/0OC0bhuCEC

— Ross Feinstein (@RossFeinstein) November 22, 2022

According to a story appearing on CNBC, Capt. Ric Wilson, vice president of Envoy’s flight operations, said in a note to staff that the incapacitated pilot was a captain in training, occupying the left seat.

Yesterday the airline released a statement on the event, noting “The flight landed safely and first responders met the aircraft upon arrival. Despite heroic efforts by those on board and first responders on the ground, our colleague passed away at the hospital. We’re deeply saddened and are doing all we can to support his family and our colleagues at this time.”

Why Two Pilots

In the United States it is mandatory to have two pilots aboard during Part 121 operations for safety. One is pilot flying, while the other pilot performs cross checks and non-flying duties. Another reason for two pilots is to manage workload, as pilots often work long hours. Both pilots are qualified to fly the aircraft, and they take turns acting as pilot flying, often switching off legs during a long duty day. The captain retains the position as pilot-in-command throughout.

The post Incident Proves Two-Pilot Operations Are Critical for Part 121 appeared first on FLYING Magazine.